SM series
pressure switches have a cast aluminium enclosure,
intended for in-house use. These are generally used
where size is a constraint.
The repeat accuracy is better than +/- 2% FSR. A
core cable 450 mm long with C/NO/NC contacts is
provided for wiring. Pressure port is ¼”
BSP(F) standard
PRODUCT
FEATURES
Compact
Lightweight
2SPDT option available
Electrical rating :5A, 250VAC; 0.2A,
250VDC(res.)
Choice of wetted parts to suit working
media
Proof pressure available can be 4 times
MWP(optional)
Pressure port : 1/4 inch BSP(F)
OEM - EZ/EX
GENERAL
INFORMATION
EZ/EX
switches are housed in pressed steel powder coated
enclosure and are recommended for panel mounting
or indoor service.
The repeat accuracy is better than ± 1.5%
FSR. A 3/8" cable entry is provided for cables
and a terminal strip suitable for wired ends is
provided inside the enclosure. Pressure port is
¼" BSPF standard.
MX/MZ
switches are housed in a transparent, tough polycarbonate
IP66 enclosure and are intended for outdoor use.
The repeat accuracy is better than ± 2% FSR.
A choice of cable entries can be fitted to the enclosure.
An internal earthing terminal is provided.
Terminal strips suitable for wired ends is provided
inside the enclosure. Pressure port is ¼"
BSPF standard.
PRODUCT
FEATURES
Compact
IP66 protection
Tamper proof: sealing facility provided
Transparent cover for internal working
stability
Wide band adjustable differential provision
SS316 & Teflon as standard wetted
parts to suit a wide range of working
media.
Electrical rating : 15Amp. to 250 VAC
Pressure port : ¼" BSP(F)
OEM - HM
GENERAL
INFORMATION
HM series
pressure switches have a pressure die cast aluminium
powder coated enclosure and are recommended for
manifold mounting hydraulic applications.
The repeat accuracy is better than ±1% FSR.
A connector to DIN 43650 is provided for wiring.
Mainly intended for high pressure hydraulic presses.
PRODUCT
FEATURES
Compact
Lightweight
Three mounting styles
Lockable protective cap to avoid tampering
(optional)
