PRODUCTS » Gas Leakage Detectors
  KB8100 GAS CONTROLLER
 
       
KB8100 Gas Monitor System is a kind of multipoint monitor system. It is used for detecting gas concentration in the air. The system could connect to detectors for different gases in the same time. The system adopts MPU as control unit, excellent gas sensor with high sensitivity and fast response.

It will give visual and audible alarm when the gas concentration reach or exceed the presetting alarm level to remind you to take effective actions in time and it could also start the ventilation fan and other equipment to prevent from accident and explosions.
       
   
  FEATURES
  • MPU with kind of functions: data real time check, fault detecting, power management, alarm display, alarm indication, relay outputs etc;
  • 8 simulate channels for 4-20mA detectors;
  • 1 signal for RS-485 with capacity of 32pcs digital detectors;
  • Simulate channel and digital channel can be used together. The amount of the detectors is 40;
  • It can manage different gas detectors, different level and different digital unit detectors;
  • Intelligent system: easy zero calibration; free relay output;passive relay contact output, linkage programmer;
  • Easy installation.
  SPECIFICATIONS
Flow (Water)
TOP / BOTTOM CONNECTION
Installation Method: Mall-mounted
ResponseTime: <10s
Indication Method: Large LCD display real time data and system state
Visual and audio indication for alarm and fault
Contact Output: Passive contact capacity 2A/AC220V
Working Method: Continuous Work
Working Temperature: 0 – 50 Deg C
Working Humidity: <95%RH
Main Power: AC 220V +/-15%, 50Hz
 
  BS03-LCD TOXIC GAS DETECTOR
 
       
BS03-LCD toxic gas transmitter is our new gas detection instrument, adopting high-quality Electrochemical gas sensor and SMD arts and crafts, has advantages of good reproducibility, disturbing-proof against temperature and humidity, long life-span and easy operation, so it is suitable for gas detection for industrial use.

It can transfer the toxic gas concentration in air into digital signal output. It adopts output of 4-20mA three-line electric current signal, which has advantages of long-distance transmit and good disturb-proof.

It is suitable for gas detection in industrial area where toxic gas leakage easily.
       
   
  SPECIFICATIONS
Detection Principle: Electrochemical Sensor
Sample Manner: Natural Diffusion
Indication Method: 4 LED lights
Condition Display: 3 LED lights indicating: power alarm, the first level alarm
and the second level alarm
Debug Method: Infrared Control
Working Condition: Tem: -20 to 50 Deg C
Relative Hum.: <95%
Explosion Proof: Ex id IIC T6
Power Supply: DC24V +/- 25%
Output Signals: Electric current: 4 - 20mA
Switch Output: Two (first alarm level, second alarming level)
 
  JL269 PORTABLE GAS DETECTOR WITH GOOSENECK
 
       
JL269 gas detector for industrial use has a high performance and wide detecting range.

It can be used to detect methane, natural gases, propane, LPG, Hydrogen and other combustible gases and can help you to find the gas leaking sources easily.
       
   
MAIN FEATURES
 
  • Sensor does not need to be calibrated
  • Quick response to combustible gas leakage
  • Additional Long and flexible gooseneck tube
  • Adjustable sensitivity
  • 30 Level light /Tricolor show
  • Low battery alarming indication
  • The sensor fault self detection
  • High concentration protect
   
   
  SPECIFICATIONS
Detection Principle: Electrochemical Sensor
Sample Manner: Natural Diffusion
Indication Method: 4 LED lights
Condition Display: 3 LED lights indicating: power alarm, the first level alarm
and the second level alarm
Debug Method: Infrared Control
Working Condition: Tem: -20 to 50 Deg C
Relative Hum.: <95%
Explosion Proof: Ex id IIC T6
Power Supply: DC24V +/- 25%
Output Signals: Electric current: 4 - 20mA
Switch Output: Two (first alarm level, second alarming level)
« prev
next »