PRODUCTS » Pressure Switches
  MN - FIXED DIFFERENTIAL HIGH RANGE PRESSURE SWITCH
 
GENERAL INFORMATION
 
 
MN series pressure switches are housed in pressure die cast aluminium powder coated enclosure and are recommended for panel mounting or outdoor service based on the type of enclosure opted for. These can also be used in hazardous areas by choosing a flameproof enclosure certified by CMRS, Dhanbad. The repeat accuracy is better than +/- 1%FSR. A 3/8 inch cable entry is provided for cables and a terminal strip suitable for wired ends is provided inside the enclosure. Pressure port is 1/4 inch BSP(F) standard.
   
  PRODUCT FEATURES
 
  • Compact
  • Separate chamber for working parts
  • Choice of wetted parts to suit working media
  • Electrical rating : 5A, 250 VAC ; 0.2 A, 250 VDC (res.)
  • Proof pressure available can be 4 times MWP (optional)
  • Pressure port : 1/4 inch BSP(F)
 
 
 
  MA - ADJUSTABLE DIFFERENTIAL HIGH RANGE PRESSURE
  SWITCH
 
GENERAL INFORMATION
 
 
MA series pressure switches are housed in pressure die cast aluminium powder coated enclosure and are recommended for panel mounting or outdoor service based on the type of enclosure opted for. These can also be used in hazardous areas by choosing a flameproof enclosure certified by CMRS, Dhanbad. The repeat accuracy is better than +/- 1 % FSR. A 3/8 inch cable entry is provided for cables and a terminal strip suitable for wired ends is provided inside the enclosure. Pressure port is 1/4 inch BSP(F) standard.
   
  PRODUCT FEATURES
 
  • Compact
    Separate chamber for working parts
  • Wideband adjustable differential in MA series.
  • Choice of wetted parts to suit working media
  • Electrical rating : 5A, 250 VAC ; 0.2 A, 250 VDC (res.)
  • Proof pressure available can be 4 times MWP(optional)
  • Pressure port : 1/4 inch BSP(F)
 
 
 
  MB - LOW VARIABLE DIFFERENTIAL HIGH RANGE   PRESSURE
  SWITCH
 
GENERAL INFORMATION
 
 
MB series pressure switches are housed in pressure die cast aluminium powder coated enclosure and are recommended for panel mounting or outdoor service based on the type of enclosure opted for. These can also be used in hazardous areas by choosing a flameproof enclosure certified by CMRS, Dhanbad. The repeat accuracy is better than +/- 1% FSR. A 3/8 inch cable entry is provided for cables and a terminal strip suitable for wired ends is provided inside the enclosure. Pressure port is 1/4 inch BSP(F) standard.
   
  PRODUCT FEATURES
 
  • Compact
  • Separate chamber for working parts
  • Narrow band adjustable differential in MB series
  • Choice of wetted parts to suit working media.
  • Electrical rating : 5A, 250 VAC ; 0.2 A, 250 VDC (res.)
  • Proof pressure available can be 4 times MWP(optional)
  • Pressure port : 1/4 inch BSP(F)
 
 
 
  DP - PRESSURE DIFFERENCE SWITCH
 
GENERAL INFORMATION
 
 
DP series pressure difference switches are housed in pressure die cast aluminium powder coated enclosure and are recommended for panel mounting or indoor service based on the type of enclosure opted for.

These can also be used in hazardous areas by choosing a flameproof enclosure certified by CMRS, Dhanbad. The repeat accuracy is better than +/- 1 % FSR.

A 3/8” cable entry is provided for cables and a terminal strip suitable for wired ends is provided inside the enclosure. Pressure ports are 1/4 inch BSP(F) standard.
   
  PRODUCT FEATURES
 
  • Compact
  • Separate chamber for working parts
  • Choice of wetted parts to suit working media.
  • Electrical rating : 5A, 250 VAC ; 0.2 A, 250 VDC (res.)
  • Proof pressure available can be 4 times MWP(optional)
  • Pressure port : 1/4 inch BSP(F)
 
« prev
next »